APPLICATION INSTRUCTIONS

  • mollis® upholstered panels can be freely combined with each other within one series. We do not recommend assembling together panels from different series due to the possibility of minimal differences in the thickness of the panel.
  • mollis® upholstered panels are decorative products and despite their ability to absorb sound (class C), they should not be used as a substitute for professional acoustic panels.
  • Before starting work, measure the room carefully, calculate the area of the target surfaces and purchase the right amount of the panels and mounting glue or Velcro pads / tapes – depending on the chosen application method.
  • Before assembly we suggest making a test layout of panels on the floor or outlining the pattern on the wall.
  • Do not cut mollis® upholstered panels by yourself – we recommend hiring professional upholsterer if necessary.
  • When laying panels on the wall, it is worth paying attention to the uniform direction of the fabric weave.
  • Ambient temperature during and within 48 hours after the application should not be lower than +5 oC and higher than +25 oC.
  • WARNING: STEGU shall not be liable for any consequences of incorrect panel application and all claims involving sizes or colors ‘as laid’ are expressly excluded.

TARGET SURFACE

All the target surfaces should be correctly conditioned. They should be strong enough, uniformly textured, even, dry and free from any loose material as well as cleaned of residues of paints, antiadhesive agents and grease. Unstable coatings should be removed.

APPLICATION WITH MOUNTING ADHESIVE

For the application of panels, we recommend a dedicated mollis® mounting glue, which has a high initial gluing strength and has a strong bond after curing.

  • Prepare the assembly tools: glue, pencil, level and ruler.
  • Gently unpack the panel from the foil so as not to damage the product.
  • Before assembly we suggest making a test layout of panels on the floor or outlining the pattern on the wall.
  • Use a dry cloth to clean the back of the panel from speck. Next, apply glue to the panel at intervals of about 25 cm.
  • Glue the panel in place, pressing it firmly. Remember to precisely fit it in the corners.

If necessary, you have about 10 minutes after application to correct the position of the panel.

APPLICATION WITH VELCRO TAPES OR PADS

  • Prepare assembly tools: Velcro tapes or pads, pencil, cutter, level and ruler.
  • Gently unpack the panel from the foil so as not to damage the product.
  • Before assembly we suggest making a test layout of panels on the floor or outlining the pattern on the wall.
  • Dry wipe the gluing surface and then glue the tape or Velcro evenly to the panel at intervals of about 25 cm with the white side.
  • Glue the panel in a suitable place on the wall, pressing it lightly.
  • If you are making a headrest on a laminated board, glue the panel in a suitable place on the board and press lightly.

We recommend Velcro with one-sided adhesive. Just connect them together and apply to the panel in several places. Next, peel off the white protective film and attach the element in a suitable place to the wall or a smooth surface, e.g. a headrest.